Kohler Premise K-702479-8L-SHP Instructions D'installation page 31

23. Install the Bottom Hinge Mount
Partially install the #10 -24 x 3/4" screw into the hinge mount. Verify that the screw does not protrude from the bottom.
Rotate the hinge mount into the threshold.
Slide the hinge mount to 1" (25 mm) from the edge of the fixed panel.
Using a 5/32" hex wrench, tighten the screw until the hinge mount is secure. Verify that the head of the screw is flush
or below the surface of the hinge mount.
Kohler Co.
1" (25 mm)
31
#10-24 x 3/4"
5/32"
1579984-2-A