Publicité
Les langues disponibles
Les langues disponibles
13. Install the Header Cover Clips
Slide four M5 square nuts into the header. Verify that the flat side of the nut faces outward.
Loosely install the header cover clips to the outermost square nuts with the M5 x 20 mm screws.
Slide the assembled header cover clips inward approximately 10" (254 mm) from the edge. Tighten the screws.
Kohler Co.
Flat Side of Square Nut
10" (254 mm)
M5 x 20 mm
10"
(254 mm)
21
Header
Cover Clip
Header
Cover Clip
1579984-2-A
Publicité
