43. Install the Bottom Seal
NOTE: If the bottom seal interferes with the threshold when opening or closing the door, cut the bulb off of the bottom
seal. Do not remove the water deflector portion of the seal.
Trim the pivot panel bottom seal so that the seal extends to the edge of the bottom hinge clamp and extends 1/8" (3
mm) beyond the outside edge of the pivot panel.
Trim an additional piece that will extend from the hinge clamp to the edge of the pivot panel.
Kohler Co.
Outside of Shower
1/8"
(3 mm)
Inside of Shower
Cut here, if needed.
51
1579984-2-A