Publicité
Les langues disponibles
Les langues disponibles
5. Install the Fixed Panel Wall Jamb
#8-18 x 1-1/2"
Using a 5/16" drill bit, drill a hole at each marked location. Use a masonry bit for tile walls.
Install the provided wall anchors. If necessary, gently tap the anchors until the anchors are flush against the wall.
Thoroughly clean the shower base and walls.
Reposition the fixed panel wall jamb, aligning with the anchor holes. Place the alignment tool in the threshold and the
fixed panel wall jamb. Verify that the fixed panel wall jamb is plumb.
Secure the fixed panel wall jamb with three #8-18 x 1-1/2" screws.
Kohler Co.
5/16"
3
2
1
13
Fixed Panel
Wall Jamb
1579984-2-A
Publicité
