Luas Installation - Britax MARATHON CLICKTIGHT Guide D'utilisation

BRITAX Child Safety, Inc.

LUAS Installation

IMPORTANT:
a child weighing more than 18 kg (40 lbs).
1. Remove the lower
connectors from the
storage compartment
at the rear of the seat
and pull the strap to
full length toward the
child's left side.
2. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
3. Recline the unoccupied
child seat and place
forward-facing on the
vehicle seat. Ensure that
the base of the child seat
is flat on the vehicle seat
and no more than 7.6 cm
(3 in.) of the base hangs
over the edge of the
vehicle seat (see page 26).
4. Open the CLICKTIGHT.
a. Press the dimple on
b. Rotate dial clockwise
5. Slide the lower connector
strap into the forward-
facing belt slots and
firmly press the lower
connectors over their
adjacent lower anchors.
– Verify that the
6. Pull the end of the lower
connector strap to
remove slack.
16
arathon CT CAN.indb 16
Do not install forward-facing with LUAS for
the CLICKTIGHT
dial.
until CLICKTIGHT
releases and lift to
open.
connectors are secure
and the strap is not
twisted.
7.6 cm
4a
4b
For
2/20/2018 11:28:27 AM