Lap Belt Installation - Britax MARATHON CLICKTIGHT Guide D'utilisation

BRITAX Child Safety, Inc.

Lap Belt Installation

1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place the unoccupied child
seat forward-facing on the
vehicle seat in the upright
position. Ensure that the
base of the child seat is
flat on the vehicle seat and
no more than 7.6 cm (3 in.)
of the base hangs over the
edge of the vehicle seat
(see page 26).
3. Open the CLICKTIGHT.
a. Press the dimple on
b. Rotate dial clockwise
4. Slide the vehicle belt into
the forward-facing belt
slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Push down into the middle
of the child seating area
with moderate force,
compressing the vehicle
seat while tightening the
vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
18
arathon CT CAN.indb 18
the CLICKTIGHT
dial.
until CLICKTIGHT
releases and lift to
open.
7.6 cm
3a
3b
7.
8.
2/20/2018 11:28:29 AM