Britax MARATHON CLICKTIGHT Guide D'utilisation page 38

BRITAX Child Safety, Inc.
Replacing the Cover
1. Attach one side of the
upper shell cover at the
forward-facing belt path,
pull the cover over the
back of the shell, and
secure at opposite belt
path.
2. Replace lower shell cover.
a. Open the
b. Tuck one of the plastic
c. Tuck the lower shell
d. Continue replacing
e. Thread the harness
36
arathon CT CAN.indb 36
CLICKTIGHT.
tabs on the lower
shell cover into the
outer side of the shell
between the forward
and rear-facing belt
paths.
cover around the inner
and outer sides of the
shell from the forward-
facing belt paths to the
front of the child seat.
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
Ensure shell cover is
secured behind red
markers to allow for
proper function of
CLICKTIGHT.
adjuster strap through
the front of the lower
shell cover.
2a
2b
2c
2d
2e
2/20/2018 11:28:47 AM