Luas Installation - Britax MARATHON CLICKTIGHT Guide D'utilisation

BRITAX Child Safety, Inc.

LUAS Installation

IMPORTANT:
child weighing more than 15.8 kg (35 lbs).
1. Open the CLICKTIGHT.
a. Press the dimple on
b. Rotate dial clockwise
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place
rear-facing on the vehicle
seat (see pages 25 - 26).
Ensure that no more than
7.6 cm (3 in.) of the base
hangs over the edge of
the vehicle seat.
4. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
– Verify that the
6. Pull the end of the lower
connector strap to
remove slack.
10
arathon CT CAN.indb 10
Do not install rear-facing with LUAS for a
the CLICKTIGHT
dial.
until CLICKTIGHT
releases and lift to
open.
connectors are secure
and the strap is not
twisted.
1a
1b
7.6 cm
2/20/2018 11:28:23 AM