Luas Installation - Britax BOULEVARD CLICKTIGHT Guide D'utilisation

BRITAX Child Safety, Inc.

LUAS Installation

IMPORTANT: Do not install rear-facing with LUAS for a
child weighing more than 15.8 kg (35 lbs).
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat
(see page 25).
4. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
– Verify that the
connectors are secure
and the strap is not
twisted.
6. Pull the end of the lower
connector strap to
remove slack.
10
All manuals and user guides at all-guides.com
1a
1b
BOULEVARD CLICKTIGHT Canadian User Guide
7. Close the CLICKTIGHT.
– A click confirms the
CLICKTIGHT is secure.
Rear-Facing Installation with LUAS
9 Ensure that the logo on the CLICKTIGHT dial has
returned to a horizontal position.
9 Ensure that the anti-rebound bar is properly installed
(see page 27).
9 Ensure that the ball in the recline indicator is within
the allowable blue section for the size of the child (see
page 25).
9 Check that all connections are secure and straps are
not twisted.
9 Check that the child seat cannot be moved front to
back or side to side more than 2.5 cm (1 in.) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
11