Anti-Rebound Bar - Britax MARATHON CLICKTIGHT Guide D'utilisation

Anti-Rebound Bar

ely
In the event of a crash, the anti-rebound bar is designed to
prevent rebound rotation in rear-facing car seat installations.
The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this child
seat.
IMPORTANT:
forward-facing installation.
Installing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Pull back on the shell cover
behind the red marker and
locate the open end of the
structure tube.
3. Insert one end of the anti-
rebound bar into the tube
as shown, then repeat for
other side.
4. Lift up on the anti-rebound
bar to ensure both ends
are properly set inside the
structure tubes.
NOTE: Closing the CLICKTIGHT will finish securing
the anti-rebound bar.
Removing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Grasp the anti-rebound
bar at both sides and pull
away from the child seat.
arathon CT CAN.indb 27
MARATHON CLICKTIGHT User Guide
The anti-rebound bar MUST be removed for
Structure
Tube
2/20/2018 11:28:41 AM
27