Britax MARATHON CLICKTIGHT Guide D'utilisation page 21

7. Hold harness straps up
and away from seat while
closing the CLICKTIGHT.
– A click confirms the
NOTE: If the CLICKTIGHT
is difficult to close, repeat
step 6 with less tension in
the vehicle belt.
8. Attach the tether to a
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 30).
Forward-Facing Installation with Lap Belt
9 Ensure that the logo on the CLICKTIGHT dial has
9 Check that all connections are secure and straps are
9 After the child is secured, ensure that the ball in the
9 Check that the child seat cannot be moved front to
9 Check that any excess tether webbing is contained
arathon CT CAN.indb 19
CLICKTIGHT is secure.
returned to a horizontal position.
not twisted.
recline indicator is within the allowable green section
and that no more than 7.6 cm (3 in.) of the base hangs
over the edge of the vehicle seat (see pages 25-26).
back or side to side more than 2.5 cm (1 in.) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
within your vehicle and secured in the elastic strap.
MARATHON CLICKTIGHT User Guide
19
2/20/2018 11:28:29 AM