SilverCrest SGBR 1500 D1 KAT Mode D'emploi page 38

SilverCrest SGBR 1500 D1 KAT
•
Secure the food to the rotisserie (12) using the clips (13). To do this, undo the screws on the
clips (13). Now fix your food by adjusting the clips (13) so they hold the food securely. Re-
tighten the screws on the clips (13). Make sure that the recesses are kept clear so that you can
remove the rotisserie (12) using the handle (14) after cooking.
•
First, insert the end of the rotisserie (12) without the groove around 5 mm into the drive (2).
•
Then insert the other end of the rotisserie (12) with the groove into the rotisserie holder. Make
sure that the rotisserie (12) and the food to be prepared can turn freely in the cooking space
(1).
Give the electric oven and grill around 10 minutes to heat up to the desired temperature.
•
Close the door (8) of the electric oven and grill.
•
Plug the mains plug into an easily accessible mains socket.
•
Set the temperature you want using the thermostat (4).
•
Move the mode selector switch (6) to the "Top heat with fan and rotisserie function".
•
Set the timer (7) to the time you want. For continuous mode, turn the timer (7) anticlockwise to
"ON".
•
The electric oven and grill now switches on and the rotisserie (12) starts to turn. The status
indicator (5) lights up when the device is in use.
•
The electric oven and grill switches off automatically after the time set on the timer (7). When
the timer (7) reaches the "OFF" position, there is a beep. You can also turn the timer (7) to the
"OFF" position manually to switch the electric oven and grill off before the time has finished. If
you have set the timer (7) to "ON", you need to switch the electric oven and grill off manually.
To do this, turn the timer (7) to the "OFF" position.
•
Now open the door (8) of the electric oven and grill. Always use the door handle (9).
36 - English