Keysight U1281A Guide De L'utilisateur page 41

Table 1-8
Keysight U1281A/U1282A User's Guide
Keypad functions (continued)
Legend
Less than 1 second
– Sets a manual range and disables
autoranging.
– Press
Range
through each available measurement
range.
Range
– Enables or disables the temperature
measurement without ambient
compensation mode.
– Changes the measurement range and
restarts the maximum and minimum
peak measurements.
Switches between the regular and shifted
measurement function (icon printed in
orange above the rotary switch position — if
available).
– Press
Shift
Esc
Shift
the regular measurement function.
Esc
– Press
Shift
Esc
switch from the
access the Setup menu.
Function when pressed for:
– Enables autoranging.
again to scroll
– During temperature measurements,
pressing
temperature measurement unit
between Celsius (°C) and Fahrenheit
(°F)
Enters the Log Review menu.
– Press
through the previously recorded
export ( ), manual (H), event (E), or
interval (A) logging data.
– Press
to view the first or last logged entry
respectively.
– Press
through the logged data.
again to switch back to
– Press
stored entry for the selected logging
mode.
while turning the rotary
Press and hold
position to
than 1 second to clear all the logged
data for the selected logging mode.
– Press
to sanitize all log memories when all
the logging modes have been cleared
of all entries.
– Press
second to exit this mode.
Introduction
More than 1 second
page
changes the
Range
again to scroll
Shift
Esc
or on
Hold
Vsense
or to scroll
page
Hz to delete the last
Save
page
Hz for more
Save
Vsense
for more than 1 second
for more than 1
Shift
Esc
1
Learn
more on:
28
37
and
113
41