Publicité
Les langues disponibles
Les langues disponibles
4
Multimeter Setup Options
Enabling the AC path filter (for U1282A only)
This low-pass filter is used with AC voltage and current measurements. The AC signal will
be attenuated in accordance to the specified low-pass filter (LPF) frequency.
Parameter
LPF
To enable the AC path filter:
1 Press
2 Press
Figure 4-21
3 Press
4 Press
5 Press and hold
140
Range
oFF or on
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
Hold
icon appears to the right of the secondary display.
LPF display - AC
Vsense
or
to enable or disable the filter.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
until
is shown on the secondary display and the
to discard your changes.
Shift
Esc
Keysight U1281A/U1282A User's Guide
Default setting
oFF
Publicité
