Publicité
Les langues disponibles
Les langues disponibles
Changing the battery type
This setting is used to change the battery type. The battery capacity indication is based on
this setting. The Primary (Pri) setting is used for non-rechargeable batteries and the
Secondary (SEC) setting is used for rechargeable batteries.
Parameter
bAt
To change the battery type:
1 Press
2 Press
Figure 4-14
3 Press
4 Press
5 Press and hold
Keysight U1281A/U1282A User's Guide
Range
Pri or SEC
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
until
Hold
bAt display
Vsense
or
to change the battery type.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Multimeter Setup Options
Default setting
Pri
is shown on the secondary display.
to discard your changes.
Shift
Esc
4
133
Publicité
