Publicité
Les langues disponibles
Les langues disponibles
4
Multimeter Setup Options
Changing the continuity alert type
This setting is used to define the continuity alert. You may choose between the beeper, the
red light-emitting diode (LED), both, or none.
Parameter
Horn
To change the continuity alert type:
1 Press
2 Press
Figure 4-13
3 Press
4 Press
step 3 to edit.
5 Press
6 Press and hold
132
Range
(bE.rL), (bE.--), (--.rL), or (--.--)
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
Hold
icon appears below the secondary display.
Horn display
Vsense
or
to set the continuity alert type.
or
on
Hold
to save your changes or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
until
is shown on the secondary display and the
to navigate to the consecutive values, then repeat
to discard your changes.
Shift
Esc
Keysight U1281A/U1282A User's Guide
Default setting
(bE.rL)
Publicité
