Keysight U1281A Guide De L'utilisateur page 116

Masquer les pouces Voir aussi pour U1281A:

Les langues disponibles

Multimeter Setup Options

Using the Setup Menu

The multimeter's Setup menu allows you to change a number of nonvolatile preset

features. Modifying these settings affects the general operation of your multimeter across

several functions. Select a setting to edit to perform one of the following:

– Switch between two values, such as on or off.

– Scroll through multiple values from a predefined list.

– Decrease or increase a numerical value within a fixed range.

To contents of the Setup menu are summarized in Table 4-2.

The multimeter will automatically exit the Setup menu after 30 seconds of inactivity.

Setup menu key functions

position to access the Setup menu.

Press and hold

While the menu item is flashing, press

digit of the menu item (in the primary display) will flash to indicate that you can

now change the values shown in the primary display.

multiple values from a list, or to decrease or increase a numerical value.

While the menu item is flashing, press

while turning the rotary switch from the OFF position to any ON

until the multimeter restarts to exit the Setup menu.

to step through the menu items.

at each menu item to change the preset settings. The last

again to switch between two values, to scroll through

Keysight U1281A/U1282A User's Guide

to discard your changes.

to save your changes.