Scheppach PLM1800 Traduction Des Instructions D'origine page 27

37. Terminal strip
38. Planing blade
39. Planing blade protection springs
40. Planing shaft
41. Planing blade holding pins
42. Anti-return claws
43. Threaded rod for adjusting the height of the planer
44. Guide columns for height adjustment
3. Scope of delivery
• 1x thickness planer
• 1x suction hose
• 2x knurled screw
• 2x magnet
• 1x suction adapter
• 1x height adjustment crank
• 1x hexagon socket screw
• 1x washer
• 1x Allen key
• 1x push stick
• 1x operating manual
4. Intended use
Debarked, rectangular sawn wood of all types can be
planed to the desired width and thickness using the
thickness planer.
The thickness planer has been specially designed for
the planing of solid wood.
The device is not suitable for cutting rebates, indenta-
tions, tenons or shapes
Metal parts or splintering material must not be pro-
cessed with this device.
Do not process wood that contains numerous branches
or knotholes.
Make sure that the workpiece does not include any ca-
bles, ropes, strands, nails or the like.
The machine must be securely fixed to the floor / work-
ing plate using suitable screws as there is a risk of tip-
ping. (fig. 9 + 10)
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of mis-
use. The user / operator and not the manufacturer will
be liable for any damage or injuries of any kind caused
as a result of this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed about
potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the ma-
chine.
The machine shall be operated only with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for
equivalent purposes.
5. Important information
General Safety Instructions
m WARNING! When using electric tools basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury includ-
ing the following.
Read all these instructions before attempting to oper-
ate this product and save these instructions.
Safe operation
1 Keep work area clear
- Cluttered areas and benches invite injuries.
2 Consider work area environment
- Do not expose tools to rain.
- Do not use tools in damp or wet locations.
- Keep work area well lit.
- Do not use tools in the presence of flammable
liquids or gases.
3 Guard against electric shock
- Avoid body contact with earthed or grounded sur-
faces (e.g. pipes, radiators, ranges, refrigerators).
4 Keep other persons away
- Do not let persons, especially children, not in-
volved in the work touch the tool or the extension
cord and keep them away from the work area.
www.scheppach.com GB | 27