Parkside PKGA 20-Li C2 Traduction Des Instructions D'origine page 40

GB MT
Shorting the battery terminals togeth-
er may cause burns or a fire.
d) Under abusive conditions, li-
quid may be ejected from the
battery; avoid contact. If con-
tact accidentally occurs, flush
with water. If liquid contacts
eyes, additionally seek medic-
al help. Liquid ejected from the bat-
tery may cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batteries
may exhibit unpredictable behaviour
resulting in fire, explosion or risk of in-
jury.
f) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may
cause explosion.
g) Follow all charging instruc-
tions and do not charge the
battery pack or tool outside
the temperature range spe-
cified in the instructions. Char-
ging improperly or at temperatures
outside the specified range may dam-
age the battery and increase the risk
of fire.
6. SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identical re-
placement parts. This will ensure
that the safety of the power tool is
maintained.
b) Never service damaged bat-
tery packs. Service of battery
40
packs should only be performed by
the manufacturer or authorized ser-
vice providers.
Additional safety instruc-
tions
WARNING! Sawing or sanding
may produce harmful dusts (e.g. metals
or some types of wood) that may be
hazardous to the operator or nearby
persons. Make sure that the workplace
is well ventilated. Always wear safety
goggles, safety gloves and respiratory
protection.
WARNING! Danger to health! The
device is not suitable for processing ma-
terials containing lead and asbestos.
Special safety information
for the cordless combination
tool
• Hold the power tool by in-
sulated gripping surfaces,
when performing an opera-
tion where the fastener may
contact hidden wiring. Fasteners
contacting a "live" wire may make
exposed metal parts of the power
tool "live" and could give the operat-
or an electric shock.
• Use suitable detectors in order
to find hidden supply lines or
ask the local utility company.
Contact with electrical cables can
lead to electric shock and fire, con-
tact with a gas pipe can result in an
explosion. Damage to a water pipe
can lead to property damage and
electric shock.