Parkside PKGA 20-Li C2 Traduction Des Instructions D'origine page 38

GB MT
d) Do not abuse the cord. Nev-
er use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e) When operating a power tool
outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f) If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of
an RCD reduces the risk of electric
shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you
are doing and use common
sense when operating a
power tool. Do not use a
power tool while you are
tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operat-
ing power tools may result in serious
personal injury.
b) Use personal protective equip-
ment. Always wear eye pro-
tection. Protective equipment such
as a dust mask, non-skid safety shoes,
hard hat or hearing protection used
for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional start-
ing. Ensure the switch is in the
38
off-position before connecting
to power source and/or bat-
tery pack, picking up or car-
rying the tool. Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a key
left attached to a rotating part of the
power tool may result in personal in-
jury.
e) Do not overreach. Keep prop-
er footing and balance at all
times. This enables better control
of the power tool in unexpected situ-
ations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair and clothing
away from moving parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the
connection of dust extraction
and collection facilities, ensure
these are connected and prop-
erly used. Use of dust collection
can reduce dust-related hazards.
h) Do not let familiarity gained
from frequent use of tools al-
low you to become compla-
cent and ignore tool safety
principles. A careless action can
cause severe injury within a fraction
of a second.