Parkside PKGA 20-Li C2 Traduction Des Instructions D'origine page 37

Observe the operating instruc-
tions
CAUTION! Risk of injury
from the rotating tool! Keep
hands away.
Electrical devices must not
be disposed of with domestic
waste.
Graphic symbols on the saw
blades
Use eye protection
wood
metal
Symbols used in the instruction
manual
Caution!
General Power Tool
Safety Warnings
WARNING! Read all safety
warnings, instructions, illustra-
tions and specifications provided
with this power tool. Failure to fol-
low all instructions listed below may res-
ult in electric shock, fire and/or serious
injury. Save all warnings and in-
structions for future reference.
Only operate the
speed selector switch
when the tool has
stopped.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1. WORK AREA SAFETY
a) Keep work area clean and
well lit. Cluttered or dark areas in-
vite accidents.
b) Do not operate power tools in
explosive atmospheres, such
as in the presence of flam-
mable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystand-
ers away while operating a
power tool. Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify
the plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, radiat-
ors, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase
the risk of electric shock.
GB MT
37