Hatco THERMMAX Salamander TMS2-1H Serie Manuel D'instructions page 4

MODEL DESCRIPTION
CAUTION
BURN HAZARD:
• Some exterior surfaces on the unit will
get hot. Use caution when touching these
areas.
• Plate/tray will be very hot upon removal—
use oven mitt, protective clothing, or pan
gripper to remove.
Locate unit at proper counter height in an
area that is convenient for use. Location
should be level to prevent unit or its
contents from falling accidentally and
strong enough to support the weight of the
unit and contents.
Do not place anything on top of unit; doing
so may subject personnel to injury or
damage unit.
MODEL DESCRIPTION
All Models
Hatco's THERMMAX Salamander is specially-designed for
®
versatility in the kitchen with the capabilities to cook, grill,
reheat, and keep foods hot. The salamander is constructed
of stainless steel for easy cleaning and durability. The high-
powered heating elements are ready for use within 8 seconds.
The heating elements are strategically positioned inside the
moveable upper housing to reduce the transfer of heat to the
surrounding area. Holding mode is ideal for keeping foods hot
or reheating foods. A removeable cooking grate and drip tray
allows for easy cleanup. The unique features and flexibility of
the THERMMAX Salamander make it easy to operate, energy
efficient, and highly functional in any kitchen.
MODEL DESIGNATION
THERMMAX
T M S 2 - 1 H
Salamander
Units are voltage-specific.
to specification label for electrical
requirements before beginning installation.
Use non-abrasive cleaners and cloths only.
Abrasive cleaners and cloths could scratch
finish of unit, marring its appearance and
making it susceptible to soil accumulation.
Clean unit daily to avoid malfunctions and
maintain sanitary operation.
Height
Gauge
Control
Panel
H = Cook and Hold Features
Capacity = Full-Size
Gastronorm Pan
4
NOTICE
Power
I/O (on/off)
Switch
Model TMS2-1H
Form No. TMS2CEM-1021
Refer
Upper
Housing
Cooking
Grate
Drip
Tray