Twistpad With Twist Knob; Remove The Twist Knob; Storing The Twist Knob; Operating The Appliance - Gaggenau CI 292 600 Notice D'utilisation

Twistpad with Twist Knob

j
T w i s t p a d w i t h T w i s t K n o b
T he twistpad is the area in which you can use the twist
knob to select the elements and heat settings.
The twist knob is magnetic and is placed in the middle of
the area marked on the twistpad. To activate an element,
press the twist knob so that it tilts in the appropriate area
for the required element. Turning the twist knob selects
the heat setting.
Position the twist knob on the twist pad so that it is in the
center of the indicators that delimit the twist pad area.
Note: Even if the twist knob is not entirely central, this
will not under any circumstances affect how the twist
knob works.

Remove the twist knob

Removing the twist knob activates the wipe-protection
function.
The twist knob can be removed during cooking. The wipe-
protection function is activated for 10 minutes. If the twist
knob is not returned to its position before this time
elapses, the cooktop switches off.
9
WARNING
Risk of fire!
If during these 10 minutes a metallic object is
placed in the twistpad area, the cooktop may
continue to heat up. Therefore, always switch off
the cooktop using the main switch.

Storing the twist knob

A strong magnet is located inside of the twist knob. Keep
the twist knob away from magnetic data carriers such as
credit cards and cards with magnetic strips. Otherwise,
these data carriers may be damaged beyond repair.
The magnet may also cause faults on televisions and
screens.
Note: The twist knob is magnetic. Metal particles stuck
to the bottom may scratch the surface of the cooktop.
Always clean the twist knob thoroughly.
Twistpad with Twist Knob

Operating the appliance

This chapter explains how to set a cooking position. The
table shows heat settings and cooking times for various
meals.

Switching the cooktop on and off

Switch the cooktop on and off using the main switch.
To switch on: Position the twist knob in the area in which
it can be used. Touch the # symbol. The symbols for the
elements and the functions available at this time light up.
‹ lights up next to the elements. The cooktop is ready for
use.
To switch off: Touch the # symbol until the indicator
goes out. All elements are switched off. The residual heat
indicator remains lit until the elements have cooled down
sufficiently.
Notes
The cooktop switches off automatically if all elements
▯
have been switched off for more than 20 seconds.
The selected settings are stored for 5 seconds after
▯
the cooktop has been switched off.
If during this period, the element is switched back on,
the previously set heating settings flash. To apply
these settings, tap on the twist knob within the next
5 seconds.
If you do not tap the twist knob or if you touch a
different sensor key, all previous settings will be
deleted.
en-us
17