Keep-Warm Function; Activating; Deactivating; Wireless Cooking Sensor - Gaggenau CI 292 600 Notice D'utilisation

en-us

Keep-warm function

Keep-warm function
z
K e e p - w a r m f u n c t i o n
T his function is suitable for melting chocolate or butter
and for keeping food warm.

Activating

1.
Select the required element.
2. Touch the £ symbol within the next 10 seconds.
– lights up on the display.
The function has now been activated.

Deactivating

1.
Select the element.
Press the £ symbol, turn the twist knob or select a
2.
different function.
The – indicator goes out. The element switches itself
off and the residual heat indicator lights up.
The function is deactivated.
26

Wireless cooking sensor

‚
W i r e l e s s c o o k i n g s e n s o r
Y ou will need to connect the wireless cooking sensor to
the control panel before using the cooking functions for
the first time.
Preparing and caring for the wireless
cooking sensor
This section provides information on:
Adhering the silicone patch
▯
Attaching the wireless cooking sensor
▯
Cleaning
▯
Changing the battery
▯
Silicone patches and cooking sensors can be purchased
from specialist retailers, our technical Customer Service
or our official website. Please quote the relevant
reference number when doing so:
00577921 Set of 5 silicone patches
CA060300 Cooking sensor and set of 5 silicone
patches
Gluing on the silicone patch
The silicone patch attaches the cooking sensor to the
cookware.
When a pot is used for the first time with the cooking
functions, the silicone patch must be adhered directly to
the pot. It is important
1.
The part of the cookware to which the patch is to be
adhered must be free of grease. Clean the pan, dry it
thoroughly and wipe the area where the patch is to be
adhered with an all purpose degreasing agent.
2.
Remove the protective film from the silicone patch.
Adhere the silicone patch in the correct place on the
outside of the pot using the supplied template as a
guide.