Timer Functions; Cooking Timer Short-Term Timer Stopwatch Function - Gaggenau CI 292 600 Notice D'utilisation

Timer functions

T i m e r f u n c t i o n s
Y our cooktop has three timer functions:
Cooking timer
▯
Short-term timer
▯
Stopwatch function
▯
Cooking timer
The element automatically switches off after the time that
is set has elapsed.
You can set a time of up to 99 minutes. The time elapses
in the timer display in minutes, the final half a minute is
displayed in seconds.
Setting procedure:
1.
Select the element and the required heat setting.
2. Touch the 6 symbol. The 6 display for the element
lights up.‹‹ lights up on the timer display.
3.
Use the Twist knob to select the required cooking
time.
The cooking time begins to elapse.
Note: If the flexible cooking zone is selected as the only
element, the set time for the entire cooking zone is the
same.
Frying/cooking sensor function
If a cooking time has been programmed for a element and
the frying sensor or cooking sensor is activated, the
cooking time will begin to count down immediately,
instead of once the selected temperature setting has
been reached.
Changing or deleting the time
Select the element and then touch the 6 symbol.
Change the cooking time using the twist knob, or set to
‹‹ to delete it.
When the time has elapsed
The element switches off. A signal sounds, ‹ appears in
the element display and ‹‹ flashes in the timer display.
Touch any symbol or press the twist knob; the indicators
go out and the audible signal ceases.
Notes
If a cooking time was programmed for several
▯
elements, the cooking time that ends first appears in
the timer display. The 6 indicator for the element
lights up orange.
Select the relevant element to call up the remaining
▯
cooking time for a element. The cooking time appears
for 10 seconds.
Short-term timer
You can use the short-term timer to set a time of up to
99 minutes.
This works independently from the elements and from
other settings. This function does not automatically
switch off a element.
How to activate the function
1. Touch the Š symbol, ‹‹ appears in the short-term
timer display.
2.
Select the required time using the twist knob.
Touch the Š symbol again to confirm the selected
3.
time.
The time begins to elapse.
Changing or deleting the time
Touch the Š symbol and use the twist knob to change the
time or set it to ‹‹.
When the time has elapsed
A signal sounds for three minutes. ‹‹ flashes in the
short-term timer display. Touch the Š symbol again: The
displays go out and the audible signal ceases.
en-us
Timer functions
23