SMA SUNNY BOY STORAGE 3.8-US Instructions D'installation page 61

SMA Solar Technology AG
Procedure:
1. Enable the WPS function on the inverter. To do this, tap twice on the enclosure lid of the
Connection Unit.
☑ The blue LED flashes quickly for approx. two minutes. The WPS function is active during
this time.
2. Enable the WPS function on your smart device.
3. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
Connection with Wi-Fi network search
1. Search for Wi-Fi networks with your smart device.
2. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi
networks.
3. Open the web browser of your smart end device and enter https://smalogin.net in the
address bar.
4. If the login page of the user interface does not open, enter the IP address 192.168.12.3 or, if
your smart end device supports mDNS services, SMA[serial number].local or https://
SMA[serial number] in the address bar of the web browser.
7.3.3 Establishing a Connection via Ethernet in the local
network
New IP address for connecting with a local network
If the product is connected to a local network (e.g. via a router), the product will receive a new
IP address. Depending on the type of configuration, the new IP address will be assigned
automatically by the DHCP server (router) or manually by you. Upon completion of the
configuration, the product can only be reached via the following access addresses:
• Generally applicable access address: IP address manually assigned or assigned by the
DHCP server (router) (identification via network scanner software or network
configuration of the router).
• Access address for Apple and Linux systems: https://SMA[serial number].local (e.g.
https://SMA0123456789.local)
• Access address for Windows and Android systems: https://SMA[serial number] (e.g.
https://SMA0123456789)
Communication disturbances in the local network
The IP address range 192.168.12.0 to 192.168.12.255 is occupied for communication
amongst SMA products and for direct access to SMA products.
Communication problems might occur if this IP address range is used in the local network.
• Do not use the IP address range 192.168.12.0 to 192.168.12.255 in the local network.
Requirements:
☐ The product must be connected to the local network via a network cable (e.g. via a router).
Installation Manual
7 Commissioning
SBSxx-US-10-IA-xx-14 61