SMA SUNNY BOY STORAGE 3.8-US Instructions D'installation page 18

4 Product Overview
Position Designation
G Additional type label
The additional type label must remain permanently attached to the product.
You will find the following information on the additional type label:
• Device type (Model)
• Inverter serial number (Serial number device or S/N device)
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user
H LEDs
The LEDs indicate the operating state of the product.
4.2 Symbols on the Product
Symbol Explanation
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentations
Observe all documentations supplied with the product.
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment ground-
ing conductor.
18 SBSxx-US-10-IA-xx-14
interface of the inverter via WLAN
SMA Solar Technology AG
Installation Manual