SMA SUNNY BOY STORAGE 3.8-US Instructions D'installation page 60

7 Commissioning
7.3.2 Establishing a direct connection via WLAN
You have several options to connect the product to a smart device. The procedure can be different
depending on the devices. If the procedures described do not apply to your device, establish the
direct connection via Wi-Fi as described in the manual of your device.
The following connection options ar available:
• Connection with WPS
• Connection with Wi-Fi network search
Requirements:
☐ The product must be commissioned.
☐ A smart device (e.g. smartphone, tablet or laptop) must be available.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
☐ JavaScript must be enabled in the web browser of the smart device.
☐ The installer's SMA Grid Guard code must be available to change network-relevant settings
after the first 10 hours of feed-in operation, or after completing the installation assistant. You
can request the SMA Grid Guard code via the Online Service Center.
SSID, IP address and WLAN password
• SSID in WiFi: https://SMA[serial number] (e.g. https://SMA0123456789)
• Device-specific WLAN password: see WPA2-PSK on the type label of the product or the
rear side of the manual included in delivery
• Standard access address for a direct connection via WLAN outside of a local network:
https://smalogin.net or 192.168.12.3
Using serial number of inverter for connecting to user interface
The inverter serial number is on the supplementary type label. PIC and RID for registration in
the Sunny Portal are also included there. The supplementary type label is attached to the
Connection Unit.
• Use serial number on supplementary type label for connecting to user interface.
Importing and exporting files with smart devices having an iOS operating
system is not possible
For technical reasons, importing and exporting files (e.g., importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with smart devices having an iOS operating system.
• Use a smart device that does not have an iOS operating system for importing and
exporting files.
Connection with WPS
Requirement:
☐ The smart device must have a WPS function.
60 SBSxx-US-10-IA-xx-14
SMA Solar Technology AG
Installation Manual