Duronic FG19 Manuel D'utilisation page 14

Problem
The air fryer does
not work
Food is not fully
cooked
The ingredients
are fried unevenly
in the air fryer
Fried foods are
not crispy when
they come out of
the air fryer
Troubleshooting
Probable Cause
The appliance is not
plugged into the mains.
You have not set the
timer.
The amount of the
ingredients in the tray is
too much.
The set temperature is
too low.
The preparation/cooking
time is too short.
Certain types of food
need to be shaken or
turned halfway through
the cooking time.
You use a type of food
meant to be prepared in a
traditional deep fryer, for
example chips, chicken
wings, nuggets etc.
Put the mains plug in an earthed wall
Press the Timer button +/- buttons to
the required preparation time, then
press the Start/Pause button to switch
on the appliance.
Put smaller batches of ingredients in
the tray. Smaller batches are fried more
Press the Temperature +/- buttons to
adjust the temperature.
Press the Timer button +/- buttons to
adjust the length of cooking time.
Ingredients that lie on the top of or
across each other (e.g. fries) need to
be shaken halfway through the cooking
time. Other foods such as sausages
may require turning or flipping.
Use oven-ready foods or lightly brush
some oil onto the freshly prepared food
for a crispier result.
14
Solution
socket.
evenly.