Publicité
Part number
YU-33975, 90890-01403
YM-01434, 90890-01434
YM-01437, 90890-01437
90890-01436
YM-01442, 90890-01442
YM-01454, 90890-01454
YM-01495, 90890-01495
YU-3112-C, 90890-03112
YM-91042, 90890-04086
YM-34487
90890-06754
ACC-QUICK-GS-KT
90890-85505
Tool name/How to use
Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
Rod holder
This tool is used to hold the fork spring.
Rod puller
Rod puller attachment (M10)
These tools are used to pull up the fork damper rod.
Fork seal driver
This tool is used when install the fork oil seal.
Damper rod holder
Use this tool to remove and install the damper rod.
Drive gear holder
This tool is used when removing or tightening the pri-
mary drive gear securing nut.
Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
Dynamic spark tester
Ignition checker
This instrument is necessary for checking the ignition
system components.
Quick gasket
YAMAHA Bond No. 1215
This sealant (Bond) is used for crankcase mating sur-
face, etc.
SPECIAL TOOLS
YU-33975
YM-01434
YM-01437
YM-01442
YM-01454
YM-01495
YU-3112-C
YM-91042
YM-34487
ACC-QUICK-GS-KT
1 - 8
GEN
INFO
Illustration
90890-01403
90890-01434
90890-01437
90890-01436
90890-01442
90890-01454
90890-01495
90890-03112
90890-04086
90890-06754
90890-85505
Publicité
