Publicité
È
CLUTCH AND PRIMARY DRIVEN GEAR
5PA40870
É
5PA40880
5PA40890
5PA40900
5PA40910
4. Install:
Nut (clutch boss) 1
G
NOTE:
Use the clutch holding tool 2 to hold the clutch
boss.
Clutch holding tool:
YM-91042/90890-04086
È For USA and CDN
É Except for USA and CDN
5. Install:
Friction plate 1 1
G
Clutch plate 2
G
Friction plate 2 3
G
NOTE:
Install the clutch plates and friction plates
G
alternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
Use the friction plates 1 for the first and final
G
while paying attention to the difference in
surface pattern.
Apply the transmission oil on the friction
G
plates and clutch plates.
6. Install:
Push rod 2 1
G
Ball 2
G
Push rod 1 3
G
NOTE:
Apply the transmission oil on the push rod 1, 2
and ball.
4 - 31
ENG
70 Nm (7.0 m · kg, 50 ft · lb)
Publicité
