Publicité
ENGINE REMOVAL
EC4M5000
ASSEMBLY AND INSTALLATION
Engine installation
1. Install:
Engine 1
G
Install the engine from right side.
Pivot shaft 2
G
Engine mounting bolt (front) 3
G
Engine mounting bolt (lower) 4
G
NOTE:
Apply the molybdenum disulfide grease on the
pivot shaft.
5PA41550
Drive sprocket
1. Install:
Drive sprocket 1
G
Drive chain 2
G
NOTE:
Install the drive sprocket together with the
drive chain.
5PA41560
2. Install:
Lock washer 1
G
Nut (drive sprocket) 2
G
NOTE:
Tighten the nut while applying the rear brake.
3. Bend the lock washer tab to lock the nut.
5PA41570
4. Install:
Gasket (left crankcase cover)
G
Left crankcase cover 1
G
Screw (left crankcase cover) 2
G
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
5PA41580
4 - 52
ENG
63 Nm (6.3 m · kg, 45 ft · lb)
69 Nm (6.9 m · kg, 50 ft · lb)
69 Nm (6.9 m · kg, 50 ft · lb)
60 Nm (6.0 m · kg, 43 ft · lb)
5 Nm (0.5 m · kg, 3.6 ft · lb)
Publicité
