Publicité
FRONT WHEEL AND REAR WHEEL
5PAR0013
5PAR0014
5PA50230
5PAR0015
5 - 8
7. Install:
Right drive chain puller 1
G
Left drive chain puller 2
G
Washer 3
G
Wheel axle 4
G
NOTE:
Apply the lithium soap base grease on the
G
wheel axle.
Insert the wheel axle from right side.
G
8. Install:
Washer 1
G
Nut (wheel axle) 2
G
NOTE:
Temporarily tighten the nut (wheel axle) at this
point.
9. Adjust:
Drive chain slack a
G
Drive chain slack:
35 ~ 45 mm (1.4 ~ 1.8 in)
Refer to "DRIVE CHAIN SLACK ADJUST-
MENT" section in the CHAPTER 3.
10. Tighten:
Nut (wheel axle) 1
G
90 Nm (9.0 m · kg, 65 ft · lb)
Locknut 2
16 Nm (1.6 m · kg, 11 ft · lb)
G
CHAS
Publicité
