Publicité
Les langues disponibles
Les langues disponibles
Brake level
7.1.2
Runtime
Changing the runtime
Start of runtime count
7.1.3
Speed, RPM
AB1101en
[START/PULSE] button.
3.
Press the
�� The setting is transferred to the indicator.
[SELECT] button repeatedly until
1.
Press the
[Adjustment buttons] to set the desired value.
2.
Use the
A numerical value can be set from 0 to 9.
Adjustable in 1 second increments.
9 = shortest ramp-down time
1 = long ramp-down time
0 = longest ramp-down time (unbraked ramp-down).
3.
Press the
[START/PULSE] button.
�� The setting is transferred to the indicator.
For continuous operation, the minutes and seconds must
be set to zero.
[SELECT] button repeatedly until 't/min' is displayed.
1.
Press the
[Adjustment buttons] to set the desired value.
2.
Use the
A numerical value can be set from 1 to 99 minutes.
Adjustable in 1 minute increments.
[SELECT] button.
3.
Press the
't/sec' is displayed.
��
[Adjustment buttons] to set the desired value.
4.
Use the
A numerical value can be set from 1 to 59 seconds.
Adjustable in 1 second increments.
[START/PULSE] button.
5.
Press the
�� The settings are shown in the indicator.
■
'Dual time' function is enabled. The function is enabled ex works.
The
[SELECT] button repeatedly until 'Begins at START' or
1.
Press the
'Begins at SPEED' is displayed.
[Adjustment buttons] to select the desired setting.
2.
Use the
■
'Begins at START' = Runtime counting begins after the start of the
centrifugation run.
■
'Begins at SPEED' = Timing of the runtime starts after the set
speed is reached.
This is indicated by the
time.
[START/PULSE] button.
3.
Press the
�� The settings are shown in the indicator.
[SELECT] button repeatedly until 'RPM' is displayed.
1.
Press the
Rev.: 07 / 10.2023
Software operation
is displayed.
'é' symbol in the indicator to the left of the
25 / 44
Publicité
