Control Panel; Function Menu - afx light DYNAMIC-LZR Manuel D'utilisation

Led moonflower gobo – wash – laser 3 en 1
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9

CONTROL PANEL

To access the main menu press the MENU button. Press the UP or DOWN buttons
until you reach function you wish to change. When you reach the function you
wish to change, press the ENTER button. When a function is selected, use the UP
or DOWN buttons to change the function settings. Once your changes are made,
press the ENTER button, and then press and hold the MENU button for at least
three seconds to confirm and lock the change into the system memory. If the MENU button is not pressed and held
within eight seconds the fixture will automatically confirm and lock the change into the system memory. To exit
without making any adjustments, press the MENU BUTTON.

FUNCTION MENU

ADDR
CHND
SLND
SHND
AUTO
SENS
BLND
LED
DISP
TEST
VER
RSET
Settings
DMX Address Setting
1. Press the MENU, UP or DOWN button until "ADDR" is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm.
DMX channel mode
1. Press the MENU button until "CHND" is displayed, press ENTER. Either "14CH", "18CH" will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
SLnd
This option is for setting the unit's Master-slave mode. Press MENU to select SLnd Then press Enter to start setting.
You will find MAST or SLAV. Press UP or DOWN to choose Master or slave, then press Enter again to confirm your
selection.
MAST: Choose the device as master
SLAV: Choose the device as slave
SHND - Auto or Sound controlled
©Copyright LOTRONIC 2017
A001 - A512, DMX Address setting
14 ch
18 ch, select the channel mode
Mast
SLAV ( MASTER, SLAVE OPTION)
SOUN, AUTO1-AUTO9
OFF (sound controlled mode)
ON (Auto Mode)
000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
Yes - No (STANDBY MODE)
On - Off (Background LIGHT ON/OFF)
YES/NO (Reverse Display)
Test
V104 Software version
Reset
DYNAMIC-LZR
Page 4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

15-1880

Table des Matières