afx light DYNAMIC-LZR Manuel D'utilisation page 8

CHASE
Chase effect
Clockwise color Jump
1
change
Clockwise Color Gradual
2
Change
Counterclockwise Color
3
Jump Change
Counterclockwise Color
4
Gradual Change
5 Diagonal Color Change
6 Group Color Change
7
8
9
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-side casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Trouble Shooting
No light output from the unit;
1. Be sure the fuse has not blown. The fuse is located on the rear panel inside the power socket. See Fuse
Replacement.
2. Be sure the fuse holder is completely and properly seated.
Auto Sensing Voltage: This fixture contains an automatic voltage switch, which will auto sense the voltage when it is
plugged into the power source.
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask
your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2017
LASER GOBO ROT
Gobo Motor
Laser Choose
Rotation
Red Forward Rotate
Green Reverse Rotate
Other
Random Rotate
combinations
Rotate speed
Slow
Rotate speed
Fast
Random Rotate
speed
DYNAMIC-LZR
CHASE SPEED
Chase Effect
Laser Motor Rotation
Speed
Speed 1
Forward slow rotate
Slow
Speed 2 Forward Medium rotate
Speed 3 Forward Fast rotate
Speed 4
Speed 5 Reverse slow rotate
Speed 6 Reverse Medium rotate
Speed 7 Reverse Fast rotate
Forward and Reverse
Speed 8
Alternating Rotate
Speed 9 Fast Random Rotate
LASER ROT
Stop
Page 8