Control Panel Description; Operating - afx light LMH430Z Manuel D'utilisation

CONTROL PANEL DESCRIPTION

MENU BUTTON
Use this button to choose functions. press the MENU button up to when the required one is showing on the display. If you select a function and if you want to
escape from this function without to save the parameter, press menu button.
UP BUTTON
Use to set the value of the selected function
DOWN BUTTON
Use to set the value of the selected function
ENTER BUTTON
Use to enter in a function or to save the value of the selected function

OPERATING

Main Function
To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and
the display will blink. Use DOWN and UP button to change the mode. Once the required mode has been selected, press the ENTER button to setup, to go back
to the functions without any change press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
NO.
1
2
3
4
5
6
7
8
DMX mode
Use Menu button until A--- ( A001 to A512 ) will be display
After use Up and Down buttons to set the DMX address then press Enter button to save your choice.
In DMX mode, The unit is controlled by a DMX controller or a DMX software.
You can set the DMX address between 001 to 512
Press Menu button to back to the previous menu
Auto Mode
Use Menu button until AU-- ( AU01 or AU02 ) will be display
U Up and Down buttons to choose one of these two automatic mode ( AU01 auto mode or AU02 auto mode ) then press ENTER to save the choice.
In auto mode, the moving head will play automatically an recorded internal program
Press Menu button to back to the previous menu
Sound Mode
Use Menu button until SN-- ( SN01 or SN02 ) will be display
Use Up and Down buttons to choose one of these two sound mode ( SN01 sound mode or AU02 sound mode ) then press ENTER to save the choice.
In sound mode, the moving head will play an recorded internal program in follow sound of the music
Press Menu button to back to the previous menu
©Copyright Lotronic 2012
Display Instruction
A001-A512 Press up/down button to select DMX address
AU01-AU02 Press up/down button to select auto mode 1 or 2
SN01-SN02 Press up/down button to select sound mode 1 or 2
RPOF-RPON Press up/down button to reverse Pan move
RTOF-RTON Press up/down button to reverse Tilt move
DROF-RDON Press up/down button to reverse readout display
DFOF-DFON Press up/down button to load default output setting
RST Reset
LMH430Z