Control Panel; Function Menu - afx light SHOOTER-LED Manuel D'utilisation

2" and press ENTER.
5. The slave units will now follow the Master unit.

CONTROL PANEL

To access the main menu press the MENU button. Press the UP or DOWN
buttons until you reach function you wish to change. When you reach the
function you wish to change, press the ENTER button. When a function is
selected, use the UP or DOWN buttons to change the function settings.
Once your changes are made, press the ENTER button, and then press
and hold the MENU button for at least three seconds to confirm and lock
the change into the system memory. If the MENU button is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To exit without making any changes press the
MENU button.

FUNCTION MENU

ADDR
CHND
SLND
SHND
AUTO
SOUN
SENS
LED
DISP
PINT
TINT
TEST
RSET
Settings
DMX Address Setting
.
1. Press the MENU button until "ADDR" is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm. Then connect your DMX Controller.
DMX channel mode
©Copyright LOTRONIC 2015
001 - 512, DMX Address setting
10 ch
13 ch, select the channel mode
Mast
SL 1
SL 2 ( MAST,SL OPTION)
SH 0 – SH 7, Select the show mode
OFF
ON (Auto Mode)
On – Off (SOUND CONTROL)
000 – 100 Sound sensitivity control (0 close, 100 The most
sensitive)
On - Off (Background LIGHT ON/OFF)
Disp
Dsip (Reverse Display)
Yes - No (PAN Reverse)
Yes - No (TIL Reverse)
Test
Reset
SHOOTER-LED Page 5