Arneg Aspen 2 MAXI Manuel D'utilisation page 40

Aspen 2 Maxi
English
3. Instructions for assembly of the intermediate shelf
Attention!: Disconnect power to the cabinet before performing any operation.
Equipment necessary for assembly:
To assemble the superstructure for the Aspen cabinet, proceed as follows
19 Insert the screws ø6 in the upper profile A of
the canopy.
20 Insert the support of the shelf on the screws.
Fix the shelf with grommet nut
Note: The different shelves of the Aspen
superstructure are adjustable along the entire
length of the cabinet.
40
Screwdriver – Allen wrenches 2/3/4.
A
A
05060101 00 16/06/2009