Arneg Aspen 2 MAXI Manuel D'utilisation page 30

Aspen 2 MAXI
English
1. Manufacturer's name and address
2. Name and length of the cabinet
3. Cabinet code number
4. Cabinet registration number
5. Power supply voltage
6. Power supply frequency
7. Max. absorbed current
8. Electric power absorbed at steady state during refrigerating phase (compressors + fans + hot
cables + water evaporation resistance)
9. Electric power absorbed at steady state during defrosting phase (hot cables + evaporator fan +
water evaporation resistance)
10. Illuminating power (where applicable)
11. Useful display surface
12. Useful loading volume
13. Type of refrigerating gas used in the appliance
14. Environmental climatic class and reference temperature
15. Class of protection against humidity
16. Manufacturing job number of the cabinet
17. Manufacturing order number of the cabinet
18. Manufacturing year of the cabinet
In case of technical service request, please communicate the following information for the identifica-
tion of the cabinet: product name(Fig. 2 - 2); registration number(Fig. 2 - 4); job number(Fig. 2 - 18);
5. Transportation (Fig. 3)
The cabinets are supplied on a wooden support fixed to the base for movement with forklift trucks.
Always position the forks at the point specified on the wooden support to avoid the risk of
overturning. Use a manual or electrical forklift truck that is suitable to moving the cabinet in question.
It must have a nominal capacity of at least 1,000 kg.
6. Receipt and first cleaning
Upon receipt of the cabinet:
- Make sure that the packaging is intact and that it is not evidently damaged;
- Unpack the cabinet with care so as not to damage the cabinet itself;
- Check each single part of the cabinet making sure that all its components are intact;
- If anything is found to be damaged, immediately call the supplying company;
- Proceed with a first cleaning using neutral products, dry with a soft cloth, do not use abrasive
substances or metal sponges.
- For correct packaging disposal, remember that it contains:
Wood - Polystyrene - Polythene - PVC - Carton.
In compliance with EEC Directive 94/62 we hereby approve the materials above.
7. Installation and environmental conditions (Fig. 3)
For installation, follow the instructions below:
Do not position the cabinet:
- in places containing explosive gaseous substances;
- in the open air and, therefore, exposed to atmospheric agents;
- near sources of heat (direct sunlight, heating appliances, incandescent lights, etc.);
- near air currents (near doors, windows, air-conditioning systems, etc.) that should not exceed the
speed of 0.2 m/s.
- Remove the wooden supports on the base (used for transportation) and mount the adjustable feet
(Rif. 2) regulating them so as to position the cabinet horizontally; use a level (Rif. 1) to make sure
of its positioning.
- After moving the cabinet, check levelling.
- Before connecting the cabinet to the electric supply, make sure that all the data on the nameplate
corresponds to the characteristics of the electrical system to which it will be connected.
- In order for the cabinet to operate correctly, the temperature and the environmental relative humid-
ity must respect the parameters indicated in norm EN 441-4 that provides a Climatic Class 3
30 05060101 01 06/05/2010