Patek Philippe AQUANAUT TRAVEL TIME Mode D'emploi page 8

SETTING THE TIME –
HOME TIME
The reference time for your watch is the time at
home. To set the time, first actuate one of the cor-
rection pushers or as many times as needed to
superpose the skeletonized and solid hour hands
and to display the same color in the day/night indi-
cator apertures (HOME)
unscrew the crown completely, pull it gently all the
way out and move the hands in either direction. The
day/night indicator in the aperture (HOME)
you check whether you have set the correct time
(white = from 6 a.m. to 6 p.m.; blue = from 6 p.m. to
6 a.m.). Once you have set the correct time, push the
crown home again and screw it down.
Your watch has a stop-seconds mechanism that halts
the seconds hand as soon as you pull the crown out
to position 2. This allows you to synchronize your
watch with an acoustic time signal to one-second
accuracy. As soon as you push the crown home (posi-
tion 1), the seconds hand will start running again.
12
and (LOCAL) . Now,
lets
DISPLAY OF A SECOND
TIME ZONE – LOCAL TIME
Before you set a second time zone , check the day/
night indicator (HOME)
two superposed hour hands indicate the correct time
at home and that the day/night indicator correctly
displays daytime or nighttime hours, for instance
8 a.m. or 8 p.m.
To set the local hour hand
time zone, follow these steps:
- If you are traveling eastbound, press the correc-
tion pusher at 8 o'clock to move the solid hand
clockwise by as many hours as the two time zones
are apart (press once = +1 hour).
13
to make sure that the
to display a second