Patek Philippe AQUANAUT TRAVEL TIME Mode D'emploi page 7

CAUTION
The crown must be completely unscrewed
before you can wind the watch or set the
time.
Please wind the watch and set the time before
you put the watch on. This prevents lateral
pressure on the winding stem. Please use
your fingernails to pull the crown out and
turn it gently between two fingertips.
Never pull out the crown in a humid envi-
ronment or underwater: the water resist-
ance of your watch is assured only when the
crown is pushed home and screwed down.
Your watch has two central hour hands that
move synchronously and can be either super-
posed or separated in order to display a sec-
ond time zone.
The local time correction pushers can move
the local time hand clockwise or counter-
clockwise in one-hour step.
Correction push pieces should be actuated
exclusively with the correction stylus that
was delivered with the watch. The use of any
other tool could damage your timepiece.
Do not perform any date correction between
10 p.m. and 2 a.m.
Every year, the date must be corrected five
times – at the end of each month that has
fewer than 31 days.
10
PREPARATIONS
1. If your watch has stopped running, rewind it by
hand before performing any corrections or adjust-
ments (about 10 clockwise turns of the crown).
2. You can be sure that performing adjustment is
safe if you first set your watch to 7 a.m.; observe the
color of the day/night indicator (LOCAL)
DATE CORRECTION
The date indicated by your watch refers to the local
time zone. To set the date , actuate the correction
push piece at 4 o'clock as many times as needed to
display the current date.
11
(white).