Zehnder ComfoVar Aero Manuel D'installation Et D'entretien page 55

6. Installation
6.1 General
When the VMs and the CM are installed and connected, the software can be configured. The settings in the
software depend on the mounted variant.
6.2 Connect to CM Embedded Webserver (CM-EW)
After activation, the Wi-Fi-AP stays on for 4 hours. After 4 hours, the Wi-Fi-AP switches off automatically. For
reactivation, follow paragraph 6.2.
Fig. 6.1 - Activating Wi-Fi on CM
10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 55 10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 55
1. Press the Wi-Fi button (Fig. 6.1, pos. 2)
2. Scan the first QR code (1) with a mobile device
(not shown). In this way, a connection is
established with the correct network, which
also contains the password. If a laptop is used,
the text below the QR codes can be used. The
Wi-Fi SSID name is CVA.............. and
the password (PW) is stated below this first QR
code.
3. Scan the second QR code (2) to go to the
correct URL http://172.30.135.1/ to the
built-in web server (CM-EW). The user name is
admin and the password is 4210 (only these
four digits).
4. The Wi-Fi/http-connection to the CM-EW is
now active.
1
2
3
4
EN - 55
24-01-2023 11:11 24-01-2023 11:11