Publicité
Les langues disponibles
Les langues disponibles
5. Installation
5.1
General
Installation consists of:
installing the VMs;
■
placing and connecting the CM at the VMs;
■
installing the silencers (optional);
■
installing the adapters (optional).
■
5.2 Installation of the optional adapters on the VMs
Adaptors are only installed if the existing air ducts have a diameter of 125 mm. For 160 mm air ducts, the VM's
are installed without adapters.
The air volume controller consists of two VMs per house.
During configuration of the air volume controller, it is set whether it is based on 125 mm or 160 mm air ducts.
This is not individually adjustable per VM.
Fig. 5.1 – VM fitted with an adapter from 160 mm to 125 mm
46 - EN
10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 46
10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 46
1. Attach an adapter to the desired end of the VM.
24-01-2023 11:11
24-01-2023 11:11
Publicité
