Zehnder ComfoVar Aero Manuel D'installation Et D'entretien page 37

1. Unpacking and preparing the
installation
1.1 Package contents
Depending on the specific order, the composition of the air volume controller may consist of one or more of
the components listed below.
CM-basic or CM-connect;
■
VMs (2x);
■
Adaptors from 125 mm to 160 mm;
■
Power cable length 2 m;
■
ComfoNet-RJ45 cables with length 2 m;
■
Manual or Quick Guide.
■
1.2 Checking the delivery
Please check the following upon receipt:
1. Check that the packaging is undamaged.
2. Check that the parts are undamaged.
3. Check that the contents of the box are complete.
Report any damage, missing parts or incorrect delivery to your manufacturer immediately. Contact details are
provided on the back of this document.
1.3 Required tools and mounting material
Screwdriver, type Torx TX20;
■
Power drill;
■
Screws (minimum ø5 mm, maximum ø6 mm) for the VM;
■
Screws (maximum ø4 mm) for the CM-holder;
■
Plugs suitable for the length of the screw and the type of material to be fastened;
■
Optional RJ-45 crimping tool for Modbus cabling when used;
■
Laptop/tablet/smartphone to configure Wi-Fi.
■
10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 37 10001124369-0123-zw-zw-A4 ComfoVar Aero Installer_Service Zehnder-General_BOOK_2.indb 37
EN - 37
24-01-2023 11:10 24-01-2023 11:10