Publicité
Les langues disponibles
Les langues disponibles
CLEANING THE CENTRAL BRUSH
A thoroughly clean central brush will ensure a cleaner floor, thereby reducing costs and increasing environmental
sustainability. To clean the central brush, proceed as follows:
1.
Follow the procedure to disassemble the central brush - refer to DISASSEMBLING THE CENTRAL BRUSH".
2.
Clean the brush under a stream of running water to remove any impurities from its bristles.
N.B.: check the bristles for wear. If they are excessively worn, replace the brush - refer to "REPLACING THE
CENTRAL BRUSH".
3.
When cleaning is complete, carry out all the brush assembly steps - refer to "ASSEMBLING THE CENTRAL
BRUSH".
CLEANING THE SIDE BRUSH
A thoroughly clean side brush will ensure a cleaner floor, thereby reducing costs and increasing environmental
sustainability. To clean the side brush, proceed as follows:
1.
Go to the right-hand side of the machine.
2.
Move the brush to its idle position - refer to "SIDE BRUSH".
3.
Use a damp cloth to clean the brush, removing any dirt from the bristles.
N.B.: check the bristles for wear. If they are excessively worn, replace the brush - refer to
"DISASSEMBLING AND ASSEMBLING THE SIDE BRUSH".
40
Publicité
