Publicité
Les langues disponibles
Les langues disponibles
BATTERY CHARGE LEVEL INDICATOR
2
1
of which represents approximately 20% of
N.B.: when the residual charge is at 20%, the graphic symbol starts to flash. When this happens, take the
machine to the battery box charging area.
N.B.: a few seconds after the battery box charge level reaches 20%, the brush motor switches off
automatically. The remaining charge is sufficient for completing the task before recharging the battery box.
N.B.: a few seconds after the battery charge level reaches 10%, the suction motor switches off automatically.
With the remaining charge however, the machine can still be moved to the designated battery box recharging
area.
HOUR METER
flashes.
THERMAL CIRCUIT BREAKER
The control display is present on the control panel of the machine. The
percentage of battery charge is visible in the lower part of the screen.
The battery charge percentage indicator consists of two symbols, the
first represented by a graphic symbol (1), the second by a battery icon
(2).
N.B.: the control display shows the percentage of battery charge
in relation to the maximum capacity.
N.B.: the graphic symbol (1) consists of five charge levels, each
residual battery charge.
The control display is present on the control panel of the machine. The
hour meter (1) is present in the upper part of the screen.
The hour meter allows the user to view the machine's total time of use
2
via a series of numbers.
N.B.: the digits preceding the (".") identify the hours, while the
1
digits that come after the "." identify the tenths of an hour. A tenth
of an hour corresponds to six minutes.
N.B.: the hour meter is running when the hourglass symbol (2)
On the machine control panel there is the vacuum motor thermal circuit
breaker (1). The thermal circuit breaker intervenes when the motor is
under strain and overheats due to malfunctions or the collection of
oversized objects that block the central brush.
N.B.: when the thermal circuit breaker trips, the switch flips up
1
and blocks the power supply to the motor.
N.B.: to reset the thermal circuit breaker, turn the switch off.
33
Publicité
