•
N.B.: the battery charger power cable is delivered in the bag that also contains this instruction booklet.
2
3
2
CAUTION: keep the recovery tank open throughout the battery box recharging cycle to allow the gas fumes
to escape.
WARNING: if the LEDs in the charger display make a series of irregular flashes during the battery charging
phase, stop charging and contact your local HILLYARD service centre or the one nearest to you.
Alternatively, you can send an email to missouriservice@hillyard.com, or visit the website at
com
•
When the recharging cycle has been completed, disconnect the connector (9) on the battery charger cable
from the socket (8) on the charger body (fig.5).
•
Disconnect the charge power cable plug (11) from the mains socket (fig.6).
•
Fit the cap (13) on the battery charger socket (12) (fig.7).
8
9
5
•
Close the bonnet after releasing its catch (fig.8).
4
5
3
10
11
6
8
27
6
7
4
www.hillyard.
12
13
7