Hillyard TRIDENT SW20 Manuel D'utilisation Et D'entretien page 22

ATTENTION: the following operations must be carried out by qualified personnel, as acting incorrectly may
cause machine malfunctions.
3
4. rotate the bonnet, lifting it from the control station side (fig.3)
5. fasten the prop in the lower part of the retainer plate (fig.4)
5
6. disconnect the battery connector from the machine's power cable by pulling the relative handle (fig.2-4)
7. close the bonnet by releasing the catch and rotating the bonnet to its working position (fig.7)
8. bring the side brush to its idle position by pulling the relative lever on the control panel - refer to "SIDE BRUSH"
the machine is now in its SAFETY POSITION
4
6
7
22