Publicité
Les langues disponibles
Les langues disponibles
BATTERY MAINTENANCE AND DISPOSAL
For battery maintenance and recharging, follow the instructions contained in the document provided by the battery
manufacturer.
When the battery is dead, it must be disconnected by a technician from a HILLYARD service centre; using suitable
lifting devices, remove the battery from the machine and take it to a specific disposal centre.
N.B.: the dead battery is classified as dangerous waste, so it is compulsory to take it to an authorised
disposal centre.
INSERTING THE BATTERY IN THE MACHINE
The procedure for inserting the battery is as follows:
1. put the machine in the safety position - refer to "SECURING THE MACHINE"
2. open the bonnet and secure it with the side catch (fig.1)
3. insert the battery in its seat (fig.2)
4. connect the cables (supplied with the documentation delivered with the machine) to the respective poles of the
battery (fig.3)
1
WARNING: connect the black cable to the negative battery pole (-) and the red cable to the positive pole (+)
5. connect the battery cable to the machine cable (fig.3)
RECHARGING THE BATTERY
WARNING: the battery must be charged prior to first use and whenever it no longer provides sufficient power
to carry out the task in hand.
N.B.: before recharging, carefully read the Use and Maintenance Manual of the batteries you want to use.
N.B.: before recharging, carefully read the Use and Maintenance Manual of the battery charger you want to
use.
2
24
3
Publicité
